Project level, plumb, and square lines across a whole room at once for cabinets, shelving, or tile layout.
Cut clean holes through wood and light metal for vents, pipes, and recessed fixtures.
My go-to for simple lighting in any room. Great price, easy install, changing color temperature is a nice bonus!
Remove stripped or rusted screws without drilling out the whole fastener.
Get longer-lasting cuts on tougher material since the titanium coating outlasts standard blades.
Get exact miter and bevel angles for trim, stairs, and irregular corners instead of guessing.
Always have a sharp blade ready by snapping off a dull segment instead of stopping to resharpen or swap.
Cut precise openings for outlets and fixtures directly through hung drywall.
Knock down heavy drywall mud buildup fast without wearing out your arm on hand sanding.
Strip wire insulation to the right depth automatically, without nicking the copper underneath.
Get cleaner, faster rip and crosscuts on framing and trim lumber.
Swap in the right blade for wood, metal, or grout cutting without buying tools one at a time.
Pull wire through walls and conduit runs without opening up the drywall.
Shape edges, cut grooves, and add trim details without buying bits one profile at a time.
Drill pocket holes for strong, hidden wood joints without setting up a full jig.
Measure long room dimensions and distances solo, without a helper holding the other end of a tape.
Hold and feed mud efficiently for a professional-quality mudding job.
Score drywall, cut carpet, and trim caulk with a blade that holds an edge through heavy daily use.
Trace the exact profile of trim, pipes, or uneven surfaces so cuts fit the first time.
Get into corners and tight trim work that a full-size sander can't reach.
Retrieve dropped screws and small metal parts from tight spaces or floor cracks.
Terminate network cable ends correctly for a clean, working wired home network drop.
Great for keeping my angle grinder blade wet when cutting into tile. Also used it for removing popcorn ceiling.
Match the right size pry bar to the job, from delicate trim removal to heavy demo.
Pull nails and pop trim loose without marring the surrounding wood or drywall.
Check plumb on posts, pipes, and studs hands-free since it clings to metal on its own.
Mark fast, accurate 90° and 45° cuts on framing and trim without reaching for a separate protractor.
Keep screws seated on the bit and set to depth with one hand, speeding up hanging.
Cover large drywall or wood surfaces evenly without leaving the swirl marks a random-orbital sander can leave.
Clean up rough cutouts around outlets and pipes without re-cutting the whole panel.
Set finish nails below the surface cleanly, without leaving hammer marks on the trim.
Drive drywall screws to a consistent depth without blowing through the paper face, faster than a standard drill.
Make secure PEX crimp connections and verify each one with the built-in go/no-go gauge.
Unlock siding panels cleanly for repairs without cracking or bending them.
Apply smooth skim coats over old, textured, or damaged drywall to hide imperfections.